发布时间：2021-04-03 点击：

定型机、涂层机专业生成厂家无锡前洲兴华机械2021年4月3日讯 大热定型机一直是纺织印染行业最主要的设备之一，其维护保养对生产的稳定至关重要。

Heat setting machine is one of the most important equipment in textile printing and dyeing industry, and its maintenance is very important to the stability of production.

多数定型机关键部位都存在高温情况：其中传送链条或链夹的温度大约180℃—230℃之间，而热风机马达轴承所处温度大约150℃—170℃之间，调幅丝杆所在区域最高温度达170℃。

Most of the key parts of the setting machine have high temperature: the temperature of the transmission chain or chain clip is about 180 ℃ - 230 ℃, the temperature of the motor bearing of the hot air blower is about 150 ℃ - 170 ℃, and the maximum temperature of the area where the amplitude modulation screw is located is 170 ℃.

高温环境下，设备不能经常停机，要保持其正常运转，对润滑的要求就更为严格，除了对润滑剂具备抗高温的要求外，还得保证其长效性和无残留，防止结焦积碳对关键部位造成卡死。

Under the high temperature environment, the equipment can not be shut down frequently. In order to maintain its normal operation, the requirements for lubrication are more strict. In addition to the requirements for high temperature resistance of lubricants, the long-term performance and no residue of lubricants must be ensured to prevent coking and carbon deposition from blocking the key parts.

JAFLUB?佳弗润润滑剂针对定型机的关键润滑部位，研发出以下产品：

According to the key lubrication parts of the shaping machine, JAFLUB? lubricant has developed the following products:

使用部位 Application site	产品型号 Product model	产品描述 Product description
高温链条 High temperature chain	JAFLUB?  CA 0380	高性能氟塑润滑脂，耐 高温达288℃，挥发极少，不燃烧、不积碳，润滑周期一年以上 High performance fluoroplastic grease, high temperature resistance up to 288 ℃, little volatilization, no combustion, no carbon deposition, lubrication cycle more than one year
链夹 Chain clip	JAFLUB?  CA 2100	耐温250℃，无结焦积碳，不滴落，挥发小 Temperature resistance 250 ℃, no coking and carbon deposition, no dripping, little volatilization.
热风机马达 Hot air blower motor	JAFLUB?  X 802	长效耐高温合成润滑脂，耐高温达200 ℃ Long term high temperature resistant synthetic grease, high temperature resistance up to 200 ℃.

声明：本站信息来源于网络或者为原创文章，如对贵站有所侵犯，请联系管理员。

上一篇：涤纶织物染黑色有方法提高乌黑度？      

猜猜您喜欢的：

2021-04-03 纺织印染润滑-定型机篇

2021-04-03 涤纶织物染黑色有方法提高乌黑度？

2021-04-02 各种柔软剂的种类与特点详解

2021-04-01 分散／活性染料一浴法染色工艺

2021-04-01 涤纶与锦纶，怎么区分？

2021-03-31 直接染料的前世今生

2021-03-31 活性染色中纯碱、磷酸三钠、代用碱的不同区别

2021-03-29 告别回修率！棉织物“死折痕”、尺寸不稳定、布面效果...

2021-03-29 白棉花为何上了“黑名单”？央视揭露幕后黑手

2021-03-26 纱线染色的重现性太差问题，原因终于找到了，解决办法...